Carving leather

A master of this craftsmanship: Stanley Au Leather Art from Hong Kong.

Carving leather - stamping leather

Carving is a traditional method of [[leatherworking used to decorate leather articles. By means of carving tools (metal stamps cast into certain shapes), lines, grooves and patterns such as monograms or coats of arms are pressed, stamped and punched into the leather. Carving tools are available in many variations, shapes and sizes. Carving tools with leaf shapes and embellishments are also available.

Best for carving is thick, fine grained, Vegetable-tanned leather without binder based finish. Such leather has the necessary stability for processing and the display the motifs much better. The motifs are hammered with a hammer firmly on the leather. Such leather is usually moistened with a sponge or cloth beforehand. This is re-done at different areas of the leather and the process is repeated until the complete desired pattern is finished. A great expenditure of force is not necessary. Due to the moistening, the leather fibre is swollen and deforms easily and remains stable after drying.

Basically, this work is very easy. But as with all the arts, there are people who have a talent to "paint" motifs on leather.

For further adornment, the leather can be painted, decorated with gold leaf or patinated with transparent leather colours.

Beautiful leather-work.

Leather of Western saddles, belts or bags is more frequently carved. Carving technique had its high phase in Europe in the Middle Ages. Nowadays, this elaborate leatherwork has become less frequent. For Germany, it is estimated that less than ten percent of all saddlers are able to do such work. In the USA, carving leather is more common.

Larger motifs are embossed by means of embossing stamps.

Relatively new is the lasering of leather. This is considerably easier because no special manual sills are required. Using images, a PC and a laser, motifs are burnt into the leather surface.

Carved seat cushion in Lima, the capital of Peru.

Carved leather boots (DLM - German Leather Museum in Offenbach.

Extraordinary fine work from the leather workshop of Selestudio.

Great art: the leatherwork by Stanley Au Leather Art from Hong Kong.

250px

A wonderful filigree work of René Berends.

Carved motorcycle saddles with braiding.

Carved leather book covers of DragosMan.

Carved leather handbags and hunting bag of Selestudio.

Leather carving tools - Leather stamping tools

For carving and stamping of leather various tools are used which deform or cut the leather fibres.

Photo www.centruldepiele.ro.

Leather tools for processing leather. - Character sets.

Videos about carving

The carving of a flower in the leather workshop.

The carving of a skull in the leather workshop.

Leather cutting

Leather can be embossed or carved with motifs. Apart from these another technique is leather cutting, which comes from the Middle Ages. In this technique, the leather is wetted (soaked), heated and then superficially cut with a sharp knife. It is not cut through. With a further leather tool, the cutting edges are then deformed and supplemented by motifs. This technique was used in book binding, weapon leather, boxes and chests.

Leather cutting in very old leather. Book cover (annual figures, etc.). - Ceremonial shield made of leather, Milan around 1540 (DLM - German Leather Museum in Offenbach).