Leather lamination - Laminating leather

Lamination on the leather back side

Laminating of leather means the coating or gluing of something to its backside. This backing can be made with a different type of leather, but also with films, foams or linings. The lamination is done for protection reasons and to reinforce leather with the properties of the laminated material.

When laminating car or furniture upholstery leather, the entire backside of the leather is laminated with a laminating material. A lamination material is about 3 to 4 millimetres thick. The adhesive is applied by means of pressure and temperature.

The fabric lamination is well glued.

The leather perforation goes through the glued lamination.

The leather perforation in this case doesn't go through the glued lamination.

The lamination can be made of a wide range of materials.

Fabric lamination behind the perforation.

Advantages of this lamination: Leather can stretch over time. The leather becomes wavy and bumpy. This prevents the lamination. In addition, the lamination facilitates to achieve special shapes and replaces the otherwise conventional cushioning wool.

273px 227px

The lamination makes it possible to achieve special shapes more easily.

Stretch leather

In the case of stretch leather, a flexible fabric is laminated to the back of the leather.

Leather trousers made of laminated stretch leather.

Colour migration

When laminating, care must be taken that dying textile fabrics can lead to a colour migration of the dyes from the fabric through the leather to the visible side of the leather.