Difference between revisions of "Tanning leather"

Revision as of 18:12, 12 December 2022

What is ‘tanning’?

The use of animal skins dates back to the Stone Age, presumably as tarpaulins, protective clothing or for the manufacture of belts, harnesses, bags and containers. Animal skins were dried, fats were incorporated into the leather to make them softer and waterproof and they were possibly smoked to preserve the result. But this type of preservation was not real tanning.

In olden times, tanning was considered to be an ‘odoriferous’ trade. Tanning by ancient methods was indeed extremely foul- smelling and hence most tanneries were situated in the outskirts of towns. The use of urine and animal faeces, combined with the smell of decaying flesh due to the absence of conservation options was what made ancient tanneries so odoriferous and the profession of tanner unpopular.

Proper tanning is the most important step in leather production. It is just one part in the entire process of manufacturing leather. Tanning is the method of preserving animal skin, with or without hair using tannins. These are acidic chemical compounds that stabilise the fibre structure of the skin and prevent it from decaying, decomposing and oxidising. A tannery is where these skins and hides are processed and the profession is called tanner. The tanning process involves many stages where the skins have to be treated first and, once tanned, depending on the application and specific customer requests, the leather is dyed, ironed, sanded, oiled etc. There are endless variations

Purpose of tanning leather:

• The skin is made up of one third protein (collagen). Tannins preserve the flexibility of these protein strands and the entire tanning process prevents the protein filaments from hardening and becoming tacky on drying. ‘Parchment’ is not tanned and hence different to leather. It is hard and translucent.
• Tanning makes the leather resistant to decay (self-decomposition by microorganisms).
• The swelling of the fibres on wet leather is prevented.
• Temperature resistance is significantly increased. Untanned skin shrinks in water at 62 ° C. Chrome-tanned leather is resistant up to 100 ° C. The fibres do not stick to each other and the leather does not shrink.

Other customer requests that a tanner has to fulfil:

• The leather must be as soft or firm as the customer wishes.
• The leather needs to be breathable.
• The tanner must ensure that the appropriate colour and the appropriate gloss level is achieved.
• It must be resistant to tearing, abrasion resistant, easy to clean, light resistant and durable and a lot more.

"Real tanning" and "false tanning"

There are two distinguishable types of tanning: Real tanning and false tanning.

Real tanning is when tannins form an irreversible bond with the skin fibre. This is what happens when hides undergo chrome tanning or vegetable tanning processes.

However, in some cases the binding of tannins to the leather fibre is washable and unstable. This can be observed in methods such as tawing, tanning with fats and oils and brain tanning (Special case of tanning with fats and oils). The simple process of treating dried rawhide with oils resulting in parchment is not called "tanning" and parchment cannot be referred to as leather.

Tanning methods

The main tanning methods are chrome tanning (most of the clothing leather and upper leather of shoes), vegetable tanning (most leather belts, sole leather, riding leather) and synthetic tanning.

Often various tanning methods are combined in order to achieve certain properties of the final product. For example, the combination of synthetic tanning with chrome or vegetable tanning. This is known as combination tanning. Variants include, for example, vegetable with subsequent chrome tanning (semi-chrome leather) and chrome tanning followed by vegetable tanning (chrome retanning).

In France, Holland and Italy the term semi-chrome leather, includes both chrome tanning with vegetable re-tanning as well as a vegetable tanning with chrome re-tanning.

Another well-known kind of tanning is tanning with fats and oils. Therefore, fatty animal substances such as brain, fish oil or tallow are used. Chamois leather is the result of such a tanning method.

One of the oldest tanning methods is ‘Tawing'. This converts the animal hide using a mixture of alum (aluminium sulphate) and saline. Tawing produces white leather. This tanning process is not permanent because the tannins can be flushed out by water. Therefore this type of leather is not washable.

Tanning with fats and oils is one of oldest methods known to mankind and has been practised since about 6,000 BCE. Vegetable tanning dates back 4,000 years (Bronze Age).

Since the end of the 19th century, chrome tanning has been the most common and preferred method of tanning. Mainly due to the speed at which leather can be produced (a few days) and the simplicity of the working process. In contrast, vegetable tanning requires 15 months or longer. In 2001, 78% of all leather in Germany was chrome-tanned, 21% vegetable-tanned and only 1% tanned as chamois. Globally, approximately 80% of all leather is tanned using the chrome tanning method and 10 - 12% using the vegetable tanning process.

The type of tanning method can be identified by the colour of the leather (before colouring and before finishing). If vegetable tanned, the leather is brown. If tanned with fats or oils, it is yellowish. When tawing is used, the leather is white and chrome- tanned results are bluish grey (wet blue).

Re-tanning

Primary tanning is not always sufficient to maintain the desired characteristics specified by the customer. It is therefore re-tanned. The tannins used for this process can be different from those used in the primary tanning stage. After chrome tanning, the leather is often re-tanned with vegetable tanning agents. Such a process is called combination tanning. This process is called combination tanning. Re-tanning affects the feel of the leather, the dyeability, fullness of the leather, the fineness of the grain and the stability of grain and other factors such as light fastness before finishing.

Re-tanning also has a fading effect which can be enhanced by lightening tannins. This is important for light aniline leather without pigmentation. After chrome tanning, leather is green-bluish. The leather dye has no opacity. White leather would then be always greenish-bluish. By re-tanning, the leather can be bleached to get better results.

In the process of re-tanning, pigments can be added into the drum, which equalises the surface colouration.

Tannery

Tanneries are plants, where tanners transform the skin of slaughtered animals into leather. The rawhide undergoes many steps before becoming leather or fur. Depending on the purpose of the leather, it may then be used by various industries to produce shoes, clothing, bags, automotive and upholstered furniture. The end user rarely gets the hides or skins unprocessed in their hands. Maximum sheepskins or decorative skins are desired by consumers without any further processing.

Tanning drum

Everybody associates rotating tanning drums when thinking of tanneries. Leather rotates in barrels on many operating steps in the tannery. The production process roughly generates 5 to 10 m³ of wastewater per bovine hide.

Apart from wooden drums, stainless steel and plastic drums are also used in the tanning industry. However, there are many reasons why wooden drums are preferred over other types. Wood can withstand strong alkaline solutions and chemicals used in the initial stages of the tanning processes. They are very sturdy and have good insulation properties, unlike metal. They are also cheaper than stainless steel drums and are easy to work with when modifications or repairs are required.

There are lot of regional differences within this too. The use of plastic barrels is higher in the USA and wooden or metal drums are used more in Europe. The use of wooden barrels also has a long tradition.

Leather industry

The leather industry is declining in Europe due to environmental requirements. China has become the world's largest leather manufacturers. Specialised tanneries that produce high quality leather, and are focused on the higher price segments, are the only ones that have a good chance of survival in Europe and the rest of the western economy. Processing leather is a highly labour-intensive task. Leather needs to be cut, punched, sewn and glued. Such work is much cheaper in Asia. The manufacturing of leather shoes and clothing in the far eastern countries is done in high volumes but not all of them are necessarily of high quality. One of the ways for local manufacturers in the developed nations to fill a gap in the market, is by focusing solely on high quality shoes, clothing and furniture leather. Also car leather is still mostly produced in industrialised countries. Tanneries focusing on such segments still exist today.

Environment and ecology

Poor treatment of animals, ‘informal’ slaughterhouses and unreasonable working conditions in tanneries in far eastern countries are all problems that are regularly mentioned in the media. This creates an impression that these practices may be common throughout the rest of the world as well. However, this could not be further from the truth. Within Europe, slaughterhouses and tanneries are highly monitored and ensure they follow all the rules and guidelines to avoid negative press. A lot of tanners are pioneering a lower use of raw materials and energy, while constantly trying to find innovative ways of recycling waste and ensuring optimum wastewater treatment.

The times are long gone when tanners were directly exposed to fumes from acids and chemicals or when there was a lack of health and safety regulations around workplaces and water was heavily polluted in Europe. However, it is true that there are a lot of countries where little or no progress on such matters has been made. Especially small tanneries in poor countries manufacture leather which is processed by children working under terrible conditions.

However, consumers are afraid to poison themselves or to support poor practices by buying leather objects from such manufacturing plants. Most of this leather is for local markets and does not enter international trade because of poor quality. Much of the responsibility lies with local governments and politicians to close tanneries without environmental standards and that risk their employees' health, or relocate them in areas where it affects the quality and supply of natural resources, such as access to clean water. In 2014, the Chinese government decided to close tanneries that burdened the environment, if they did not invest in improvements.

But there is still a long way to go before the global leather industry can claim that basic or at least minimum safety standards for its workers, good environmental and animal welfare standards are met worldwide in the production of leather.

Additional information

• Leather production working steps
• Tanner
• Leather industry
• Leather quality
• Tannins
• Chrome tanning
• Vegetable tanning
• Synthetic tanning
• Tanning with fats and oils
• Brain tanning
• Chamois leather
• Tawing with alum
• How to tan leather yourself?
• Aniline tanned leather - a mistake of terminology

Videos about the leather production

The leather production in a modern tannery.

The brain tanning process.

The leather production with tannins of the oak.

Chamois leather production in Germany.

The production of fur.

WE UNDERSTAND LEATHER - WWW.COLOURLOCK.COM