Difference between revisions of "Adhesive migration – Glue migration"
| Line 65: | Line 65: | ||
To avoid such damage, appropriate adhesives must be selected, and these should not be applied too thickly. Apply thinly, dry and then glue under pressure. | To avoid such damage, appropriate adhesives must be selected, and these should not be applied too thickly. Apply thinly, dry and then glue under pressure. | ||
| − | |||
| − | |||
| − | |||
Revision as of 13:53, 27 August 2022
Contents
Leather stained by adhesive migration – glue migration
Glue migration occurs on various leather objects. Sometimes seams are fixed during the production process by glueing, or foam parts are glued to leather or imitation leather before stitching. Unsuitable adhesives or adhesives that are applied too thickly migrate through the leather over time, causing dark spots on the surface. This penetrating adhesive cannot be "cleaned" as the stains are not on the surface. They are inside the material. Objects that are affected by this problem can rarely be repaired.
Glue migration in a leather jacket.
Glue migration in pockets of a coat made of nubuck.
Glue migration on chairs, in a handbag and in leather furniture made of buffalo leather.
Glue migration in leather boots.
Glue migration in Mercedes S350.
Glue migration in sun visors of a Mercedes.
To avoid such damage, appropriate adhesives must be selected, and these should not be applied too thickly. Apply thinly, dry and then glue under pressure.
Repairing adhesive migration by colouring in the leather workshop
Professional leather repair shops can remove such stains. First, the stains have to be covered with COLOURLOCK Blocker. The blocker prevents the stain penetrating through the newly-applied layer of colour. As the stains migrate through the leather, they can also migrate through pigment based leather colours and become visible again. Thick colour layers make the leather plastic-like. Spraying thin layers of colour allows the leather to retain its natural grip.
First protect with blocker and then adjust the surface to the rest with COLOURLOCK Leather Colour.
The use of COLOURLOCK Blocker in cases of dye transfer on leather, colour migration, tyre marks, adhesive migration, black mould etc. in leather.
Other leather damages
- Leather damages (Ageing, fading, stains etc.)
- Colour migration from the backside to the front
- Leather damages (Ageing, fading, stains etc.)
- Colour separation of leather
- Typical damage to PU leather in the furniture area
- Flamingo effect: Reddish discolouration with light furniture leather in hidden areas
- Bronzing: Metallic glimmer on new leather
- Moldy leather
- Fatty spue - Fat marks on leather
Additional information
- Natural markings on leather (Scars, skin diseases, brand marks etc.)
- Leather defects (Errors in the leather production)
a kotori web solution