Difference between revisions of "Colour fastness - Light fastness of leather"

From www.leather-dictionary.com - The Leather Dictionary
Jump to: navigation, search
Line 97: Line 97:
  
 
The following parameters influence the fading sensitivity:
 
The following parameters influence the fading sensitivity:
* Für die Ausbleichempfindlichkeit ist nicht das Leder, sondern maßgeblich der eingesetzte [[Lederfarbe|Farbstoff]] verantwortlich.  
+
* The sensitivity to fading is due to the leather, but to the used [[leather colour|dye]].
* Nicht alle Farbstoffe sind gleich Ausbleichempfindlich. Zwei verschieden Schwarz- oder Rottöne können sich komplett unterschiedlich empfindlich zeigen. Gewissheit über die Ausbleichempfindlichkeit liefern nur [[Lederqualität|Vergleichstests]]. Die Empfindlichkeit gegen Lichteinflüsse kann man mit dem [[Lederqualität#Testgeräte|Xenon-Test]] prüfen.
+
* Not all dyes fade easy. Two different black or red tones can behave completely different. Reliability about the fading sensitivity can be provided by [[leather quality|comparison tests]]. The sensitivity to light influences is checked with the xenon test.
* Je mehr [[Zurichtung|Farbstoff]] auf Leder aufgetragen wird, desto besser sind die Lichtechtheiten. Leider beeinträchtigen starke Farbaufträge die [[Haptik]] des Leder.  
+
* The more [[leather colour]] is applied onto leather, the better is the light fastness. Unfortunately, strong colour application affects the [[Haptic evaluation of leather surfaces|haptic]] of leather.
* Bei im gleichen Farbton [[Lederfarbe#Durchgefärbte Leder|durchgefärbten]] Ledern ist die Ausbleichempfindlichkeit geringer.  
+
* For leathers [[leather colour#Dyed leather|dyed in the same shade]], the fading sensitivity is lower.
* UV-Schutzlacke verbessern das Ausbleichverhalten des Leders.  
+
* UV-protective lacquers improve the fading behavior of leather.
* Das Ausbleichverhalten von [[Rauleder (Rauhleder), Wildleder, Veloursleder (Velourleder), Nubuk oder Nubukleder|Rauledern]] und [[Anilinleder|Anilinledern]] ist nicht unterschiedlich.  
+
* The fading behavior of [[suede]], [[nubuck]] and [[aniline leather]] is not different.
* Das Ausbleichverhalten von Textilien bei identisch verwendeten Farbstoffen ist aufgrund der besseren Fixierbarkeit der Farbstoffe bei Textilien deutlich besser.  
+
* The fading behavior of textiles in case of identical dyes is significantly better due to the improved fixability of the dyes in textiles.
  
  
Line 113: Line 113:
 
<p>&nbsp;</p>
 
<p>&nbsp;</p>
  
The following illustrations demonstrate the effects that UV light can have on the appearance of an insufficient protected leather. The examples show [[aniline leather|aniline]] and [[nubuck]].
+
The following illustrations demonstrate the effects that UV light can have on the appearance of an insufficient protected leather. The examples show [[aniline leather|aniline]], [[suede]] and [[nubuck]].
  
  

Revision as of 13:08, 31 January 2017

LEATHER-DICTIONARY.jpg


Möbel-Nubuk-verblichen-03-blau.jpg


Light fastness of leather

The fading of leather is one of the main reasons for damage to leather objects, besides damages caused by perspiration, mechanical stress and aging.

The lightfastness of a material describes its resistance to fading by light, in particular by the constant irradiation of UV light. Among the types of leather, especially aniline-colored porous leather is at risk of losing the original hue. The less warm and natural pigmented leather are less endangered.


Anilinleder-ausbleichen-Tag-00.jpg Anilinleder-ausbleichen-Tag-16.jpg Anilinleder-ausbleichen-Tag-50.jpg

Aniline leather day 0, day 16 and day 50 in sunlight.

 

Sessel-Nubuk-gepraegt-2010-.jpg

Faded, embossed nubuck in comparison to the original pattern.

 

The light fastnesses of leather - as well as in the textile industry - are measured by means of the so-called blue scale. In doing so, eight blue wool strips of descending light fastness are placed together with a sample of the leather to be tested in ultraviolet light. Before, part of the sample surface and a part of the wool strip surface is covered and compared after the exposure. The degrees of light fastnesses are expressed as follows:


Degree designation corresponds in Central Europe
an exposure time of
8 outstanding 700 days
7 excellent 350 days
6 very good 160 days
5 good 80 days
4 pretty good 40 days
3 moderate 20 days
2 low 10 days
1 very low 5 days


For leather, grade 6 is already referred to as light resistant, since it fades faster than textiles. Aniline leather at least must have grade 3 or 4.


Xenon test

In the laboratory, there are devices that measure the fading sensitivity. Widely used is the xenon test, which attempts to simulate sunlight.


Xenon-Test-Leder-01.jpg Lichtalterung-01.jpg

Xenon-Test-Leder-02.jpg

The xenon-test shows the fading sensitivity. The grain side is faded recognizable.

 

Influence variables on fading sensitivity

The following parameters influence the fading sensitivity:

  • The sensitivity to fading is due to the leather, but to the used dye.
  • Not all dyes fade easy. Two different black or red tones can behave completely different. Reliability about the fading sensitivity can be provided by comparison tests. The sensitivity to light influences is checked with the xenon test.
  • The more leather colour is applied onto leather, the better is the light fastness. Unfortunately, strong colour application affects the haptic of leather.
  • For leathers dyed in the same shade, the fading sensitivity is lower.
  • UV-protective lacquers improve the fading behavior of leather.
  • The fading behavior of suede, nubuck and aniline leather is not different.
  • The fading behavior of textiles in case of identical dyes is significantly better due to the improved fixability of the dyes in textiles.


Ausbleichen-1311-bis-0302.jpg

Aniline leather covered in the middle after 2.5 months in the window.

 

The following illustrations demonstrate the effects that UV light can have on the appearance of an insufficient protected leather. The examples show aniline, suede and nubuck.


Bleich1.jpg Möbel-Anilin-stark-verblich.jpg

Bleich3.jpg Bleich4.jpg



Vegetable-tanned leather

The dye in aniline leather or the pigment based coatings on finished leather become lighter by light. In the case of uncolored vegetal tanned leathers, it behaves differently. The leather darkens by light. And the darkness can fade with time. Probably this effect is related to fats and oils in the leather.


Naturleder-dunkeln-Tag-00.jpg Naturleder-dunkeln-Tag-16.jpg Naturleder-dunkeln-Tag-50.jpg

Vegetable-tanned leather day 0, day 16 and day 50 in sunlight.

 

Additional information


Colourlock-GB-03.jpg

WE UNDERSTAND LEATHER - WWW.COLOURLOCK.COM