Difference between revisions of "Soiling behavior - Anti-Soiling"
Line 4: | Line 4: | ||
− | The soiling behavior is used to check how easily the leather becomes soiled and [[leather damages#Dye transfer on leather|discolored]]. The soiling behavior is determined by the [[ | + | The soiling behavior is used to check how easily the leather becomes soiled and [[leather damages#Dye transfer on leather|discolored]]. The soiling behavior is determined by the [[Finish#Primer - Finish / Top Coat|Top Coat]]. This is the top layer on the leather. Often "anti-soiling" additives are included in the Top Coat to reduce stains. |
Line 31: | Line 31: | ||
<p> </p> | <p> </p> | ||
− | By changing the [[leather colour|leather colours]] and [[ | + | By changing the [[leather colour|leather colours]] and [[Finish#Primer - Finish / Top Coat|top coats]] to water-based systems, the sensitivity of light leather with regard to soiling and [[leather damages#Dye transfer on leather|discoloration by clothing]] has greatly increased. The trend towards increasingly [[Gloss of Leather|matt]] leathers is probably also a factor. Even the more modern foam coatings with rough surfaces could have an influence on this phenomenon. |
Old [[leather furniture|furniture]] and vintage [[car leather|cars]] do not know the problem of "[[leather damages#Dye transfer on leather|jeans dye transfer]]". New cars and furniture get much faster stains caused by discolouration due to pants, jackets or belts. Customers often notice this problem when the old furniture or the old car is replaced by a new one, and the sensitivity increases significantly compared to its predecessor. | Old [[leather furniture|furniture]] and vintage [[car leather|cars]] do not know the problem of "[[leather damages#Dye transfer on leather|jeans dye transfer]]". New cars and furniture get much faster stains caused by discolouration due to pants, jackets or belts. Customers often notice this problem when the old furniture or the old car is replaced by a new one, and the sensitivity increases significantly compared to its predecessor. | ||
− | Products and methods that reduce this sensitivity are referred to as "anti-soiling". In order to react to the increasing complaints, the chemical industry offers the [[tannery]] [[finish]] additives with anti-soiling properties. Additives in the [[ | + | Products and methods that reduce this sensitivity are referred to as "anti-soiling". In order to react to the increasing complaints, the chemical industry offers the [[tannery]] [[finish]] additives with anti-soiling properties. Additives in the [[Finish#Primer - Finish / Top Coat|top coat]] with "anti-soiling" properties reduce the soiling. So far, however, the sensitivity has not yet fallen back to the level as at the time of the solvent products. |
<p align=center> | <p align=center> | ||
− | [[bild: | + | [[bild:Guertelabfaerbung-02.jpg|250px]] |
+ | [[bild:Guertelabfaerbung-01.jpg|250px]] | ||
</p> | </p> | ||
<p align=center> | <p align=center> | ||
− | ''Stains caused by a [[leather belts | + | ''Stains caused by a [[leather belts]].''<br></p> |
<p> </p> | <p> </p> | ||
Line 49: | Line 50: | ||
== Additional information == | == Additional information == | ||
− | * [[leather damages#Dye transfer on leather | + | * [[leather damages#Dye transfer on leather|Dye transfer on leather]] |
* [[Leather cleaner]] | * [[Leather cleaner]] | ||
* [[Leather quality]] | * [[Leather quality]] |
Revision as of 08:15, 30 October 2016
The soiling behavior is used to check how easily the leather becomes soiled and discolored. The soiling behavior is determined by the Top Coat. This is the top layer on the leather. Often "anti-soiling" additives are included in the Top Coat to reduce stains.
On pigmented leathers, the dirt settles in the grain structure.
In order to test discolouration, a denim fabric is put into an alkaline sweat solution and then rubbed over the leather surface. The discoloration is measured by comparison with an untreated area. Especially matt and light leather is delicate.
Typical jeans stains.
By changing the leather colours and top coats to water-based systems, the sensitivity of light leather with regard to soiling and discoloration by clothing has greatly increased. The trend towards increasingly matt leathers is probably also a factor. Even the more modern foam coatings with rough surfaces could have an influence on this phenomenon.
Old furniture and vintage cars do not know the problem of "jeans dye transfer". New cars and furniture get much faster stains caused by discolouration due to pants, jackets or belts. Customers often notice this problem when the old furniture or the old car is replaced by a new one, and the sensitivity increases significantly compared to its predecessor.
Products and methods that reduce this sensitivity are referred to as "anti-soiling". In order to react to the increasing complaints, the chemical industry offers the tannery finish additives with anti-soiling properties. Additives in the top coat with "anti-soiling" properties reduce the soiling. So far, however, the sensitivity has not yet fallen back to the level as at the time of the solvent products.
Stains caused by a leather belts.
Additional information