Difference between revisions of "Leather batch"
| Line 6: | Line 6: | ||
In the [[tannery]], the leather goes through the [[leather production|tanning and dyeing process]] in batches. Since only a certain amount of leather skins fits into a [[tanning leather#Tanning drum|tanning drum]], the appropriate quantities are combined into a batch and go through all the processes together. A lot usually contains 50 - 100 [[Hide - Skin|skins]]. It can therefore be assumed that the leather of one batch are very similar. | In the [[tannery]], the leather goes through the [[leather production|tanning and dyeing process]] in batches. Since only a certain amount of leather skins fits into a [[tanning leather#Tanning drum|tanning drum]], the appropriate quantities are combined into a batch and go through all the processes together. A lot usually contains 50 - 100 [[Hide - Skin|skins]]. It can therefore be assumed that the leather of one batch are very similar. | ||
| − | In case of leathers, where an exact equality is not possible, there are differences from batch to batch. This is also referred to as "batch deviations". [[Pull up leather - Greased leather - Waxed leather - Oiled leather|Pull up leather]] or [[aniline leather]] is not easy to be produced always with same appearance. Depending on the lot, they may differ in the end. Leather traders who have such leathers in their program must explain these deviations clearly to the customer so that this does do not lead to misunderstandings. The best is to show two maximally different leather | + | In case of leathers, where an exact equality is not possible, there are differences from batch to batch. This is also referred to as "batch deviations". [[Pull up leather - Greased leather - Waxed leather - Oiled leather|Pull up leather]] or [[aniline leather]] is not easy to be produced always with same appearance. Depending on the lot, they may differ in the end. Leather traders who have such leathers in their program must explain these deviations clearly to the customer so that this does do not lead to misunderstandings. The best is to show two maximally different leather samples. The customer then sees which variance the batch deviations have. |
| Line 28: | Line 28: | ||
<p> </p> | <p> </p> | ||
| − | The [[car leather|car | + | The [[car leather|car manufacturers]] have the highest demand for the equality of [[leather colour|colours]], [[Leather grain - Grain side|grain structures]] and [[leather quality|quality]]. But even here, slight colour differences can occur. |
| Line 35: | Line 35: | ||
</p> | </p> | ||
<p align=center> | <p align=center> | ||
| − | ''Even car leather of [[car leather#BMW|BMW]] in "black" | + | ''Even car leather of [[car leather#BMW|BMW]] in "black" of same type of leather is not always 100% identical.''<br></p> |
<p> </p> | <p> </p> | ||
| Line 52: | Line 52: | ||
| − | In the cases of the following photos, the customers had purchased [[vintage leather]] as [[semi-nubuck]] or [[Pull up leather - Greased leather - Waxed leather - Oiled leather|pull-up leather]] and had either only seen one version as a pattern and had noticed the deviation when the furniture was purchased or when they received furniture parts, which were | + | In the cases of the following photos, the customers had purchased [[vintage leather]] as [[semi-nubuck]] or [[Pull up leather - Greased leather - Waxed leather - Oiled leather|pull-up leather]] and had either only seen one version as a pattern and had noticed the deviation when the furniture was purchased or when they received furniture parts, which were delivered later. |
| − | In such cases, a better advising with photos or patterns could have helped causing misunderstandings. Often, this important communication, which would be possible, does not take place. Even the [[tannery]] should ideally point the [[leather dealer]] to the possible variance of the batches. Also the experienced [[Leather dealer|leather trader]] would have to point out his customers differences in batches. Ideally with patterns that represent well the maximum variance. | + | In such cases, a better advising with photos or patterns could have helped causing misunderstandings. Often, this important communication, which would be possible, does not take place. Even the [[tannery]] should ideally point the [[leather dealer]] to the possible variance of the batches. Also, the experienced [[Leather dealer|leather trader]] would have to point out his customers differences in batches. Ideally with patterns that represent well the maximum variance. |
If a customer wants to buy additional furniture, the furniture dealer should send photos and samples to the manufacturer, so that one remains as close to the customers leather as possible. If this is not enough, the manufacturer has to send samples to the customer, which he can put on the existing furniture to compare. This is complex and expensive, but still better than a complaint, which is annoying for everyone and also expensive. | If a customer wants to buy additional furniture, the furniture dealer should send photos and samples to the manufacturer, so that one remains as close to the customers leather as possible. If this is not enough, the manufacturer has to send samples to the customer, which he can put on the existing furniture to compare. This is complex and expensive, but still better than a complaint, which is annoying for everyone and also expensive. | ||
| Line 63: | Line 63: | ||
</p> | </p> | ||
<p align=center> | <p align=center> | ||
| − | ''Strong | + | ''Strong deviation of leather on later bought furniture. Even for professionals a strong batch deviation.''<br></p> |
<p> </p> | <p> </p> | ||
| Line 70: | Line 70: | ||
</p> | </p> | ||
<p align=center> | <p align=center> | ||
| − | ''Difference of leather pattern in the furniture house to delivered furniture. For | + | ''Difference of leather pattern in the furniture house to delivered furniture. For leather specialists still in the allowed range.''<br></p> |
<p> </p> | <p> </p> | ||
| Line 78: | Line 78: | ||
</p> | </p> | ||
<p align=center> | <p align=center> | ||
| − | '' | + | ''Additional bought [[Pull up leather - Greased leather - Waxed leather - Oiled leather|oiled nubuck]] with mentioning the variation of the look in the online shop. Therefore, still within the scope of permissible batch variances in leather.''<br></p> |
<p> </p> | <p> </p> | ||
| Line 88: | Line 88: | ||
* [[Leather dealer]] | * [[Leather dealer]] | ||
* [[Parts of the hide]] | * [[Parts of the hide]] | ||
| + | * [[Leather expert - Leather consultant]] | ||
<br> | <br> | ||
* [[Vintage leather]] | * [[Vintage leather]] | ||
Revision as of 20:55, 5 February 2017
In the tannery, the leather goes through the tanning and dyeing process in batches. Since only a certain amount of leather skins fits into a tanning drum, the appropriate quantities are combined into a batch and go through all the processes together. A lot usually contains 50 - 100 skins. It can therefore be assumed that the leather of one batch are very similar.
In case of leathers, where an exact equality is not possible, there are differences from batch to batch. This is also referred to as "batch deviations". Pull up leather or aniline leather is not easy to be produced always with same appearance. Depending on the lot, they may differ in the end. Leather traders who have such leathers in their program must explain these deviations clearly to the customer so that this does do not lead to misunderstandings. The best is to show two maximally different leather samples. The customer then sees which variance the batch deviations have.
Examination of the colour accuracy of leather with the grey scale.
Often, the buyer presumes that the quality is not sufficient, if deviations occur on a second delivery. For leather specialists, this is understandable. Only experts know how strong differences can be in some leather types. Within a batch and from batch to batch. In the case of disputes, only qualified auditors can then decide whether the deviation is permissible or not. Various measurement methods are available for measuring colour and brightness differences.
Only a certain number of hides can always be processed together.
The car manufacturers have the highest demand for the equality of colours, grain structures and quality. But even here, slight colour differences can occur.
Even car leather of BMW in "black" of same type of leather is not always 100% identical.
The more porous and natural leather is, the more the differences can be.
In the cases of the following photos, the customers had purchased vintage leather as semi-nubuck or pull-up leather and had either only seen one version as a pattern and had noticed the deviation when the furniture was purchased or when they received furniture parts, which were delivered later.
In such cases, a better advising with photos or patterns could have helped causing misunderstandings. Often, this important communication, which would be possible, does not take place. Even the tannery should ideally point the leather dealer to the possible variance of the batches. Also, the experienced leather trader would have to point out his customers differences in batches. Ideally with patterns that represent well the maximum variance.
If a customer wants to buy additional furniture, the furniture dealer should send photos and samples to the manufacturer, so that one remains as close to the customers leather as possible. If this is not enough, the manufacturer has to send samples to the customer, which he can put on the existing furniture to compare. This is complex and expensive, but still better than a complaint, which is annoying for everyone and also expensive.
Strong deviation of leather on later bought furniture. Even for professionals a strong batch deviation.
Difference of leather pattern in the furniture house to delivered furniture. For leather specialists still in the allowed range.
Additional bought oiled nubuck with mentioning the variation of the look in the online shop. Therefore, still within the scope of permissible batch variances in leather.
Additional information
a kotori web solution