Difference between revisions of "Basic rules when dealing with leather"

Revision as of 09:48, 4 December 2016

Basic rules when dealing with leather

Leather is a beautiful and natural material. Considering the most important basic rules, it is long lasting, durable and remains beautiful.

Solvent-containing products or excessive rubbing will damage the surface colouration.

Improper cleaning attempts often increase the stains. Depending on the situation, the spots get lighter or darker outer edges.

Basic rules when dealing with leather furniture

• First check if the leather is absorbent. On absorbent leathers (aniline leather, suede, nubuck) a rubbed-in drop of water will sink into the surface and darken the leather. On non-absorbing leathers water runs off. Absorbent leathers are much more sensitive.
• First test all products and treatments in a hidden area. Especially when working on absorbent leather. Absorbent leather can easily be damaged if treated wrong.
• Regular cleaning and caring of furniture leather prevents staining and signs of wear and extends the life span.
• Always clean dirty leather before using leather care products.
• Let the leather always dry by itself. Do not use a hairdryer and do not dry in direct sunlight. Otherwise the leather can shrink.
• Light leathers are sensitive to “jeans colouration” or any form of dye transfers. Always clean immediately after visible stains to avoid colouration sinking into the surface.
• Always work with the recommended products from seam to seam.
• Don’t rub too hard on stains which cannot be removed. You risk damaging the surface. Contact a specialist first.
• Don’t use aggressive solvents (acetone, nail polish remover, turpentine etc.) or abrasive liquids |to remove stains and dirt. You will cause damages.
• Don’t use wrong care products like shoe polishes and cosmetic creams.
• Leather changes because of sunlight and heat. Leather can fad and get dry. Try to avoid direct daily sunlight and the proximity of heating. Always use care products with UV protection.
• Leather gets traces of use after a while. Leather can fade over the years. If changes occur (e. g. scratches, stains, fading), react early enough. The earlier leather is helped, the easier it is to keep the leather nice over a long period.
• Leather has an optimum humidity of 40 to 60% and needs ventilation. Leather can become mold when humidity is above 70% and/or without enough air circulation.
• Coloured leather furniture, especially open-pore leather, oiled or waxed leather or suede should not be pushed directly to light walls with rough surfaces to avoid colourations to the wall. A simple test: Rub with a light, damp cloth in hidden area on the leather and check the colouration. Light colouration is normal when testing these types of leather.

Basic rules when dealing with car leather

• Apart from a few exceptions, automotive leather is provided with a protective colour coating. In doubt, first check the leather whether it is absorbent (porous) or non-absorbent. On absorbent leathers (aniline leather, suede, nubuck) a rubbed-in drop of water will sink into the surface and darken the leather. On non-absorbing leathers water runs off. Absorbent leathers are much more sensitive.
• First test all products and treatments in a hidden area. Especially when working on absorbent leather. Absorbent leather can easily be damaged if treated wrong.
• Regular cleaning and caring of furniture leather prevents staining and signs of wear and extends the life span.
• Always clean dirty leather before using leather care products.
• Let the leather always dry by itself. Do not use a hairdryer and do not dry in direct sunlight. Otherwise the leather can shrink.
• Light leathers are sensitive to “jeans colouration” or any form of dye transfers. Always clean immediately after visible stains to avoid colouration sinking into the surface.
• Always work with the recommended products from seam to seam.
• Don’t rub too hard on stains which cannot be removed. You risk damaging the surface. Contact a specialist first.
• Don’t use aggressive solvents (acetone, nail polish remover, turpentine etc.) or abrasive liquids |to remove stains and dirt. You will cause damages.
• Don’t use wrong care products like shoe polishes and cosmetic creams.
• Leather changes because of sunlight and heat. Leather can fad and get dry. Try to avoid direct daily sunlight and the proximity of heating. Always use care products with UV protection.
• Leather gets traces of use after a while. Leather can fade over the years. If changes occur (e. g. scratches, stains, fading), react early enough. The earlier leather is helped, the easier it is to keep the leather nice over a long period.
• Leather has an optimum humidity of 40 to 60% and needs ventilation. Leather can become mold when humidity is above 70% and/or without enough air circulation.

Basic rules when dealing with Leather clothing

• First check if the leather is absorbent (porous). On absorbent leathers (aniline leather, suede, nubuck) a rubbed-in drop of water will sink into the surface and darken the leather. On non-absorbing leathers water runs off. Absorbent leathers are much more sensitive.
• First test all products and treatments in a hidden area. Especially when working on absorbent leather. Absorbent leather can easily be damaged if treated wrong.
• Porous leather should regularly be protected with waterproofing. But be careful! Despite such waterproofing, porous leather always remains sensitive and should not be worn in bad weather conditions.
• Regular cleaning and caring of furniture leather prevents staining and signs of wear and extends the life span.
• Always clean dirty leather before using leather care products.
• Let the leather always dry by itself. Do not use a hairdryer and do not dry in direct sunlight. Otherwise the leather can shrink. Soften the leather by wringing at the end of the drying process or when dry.
• Garment leather can also be washed with suitable leather detergents].
• Always work with the recommended products from seam to seam.
• Don’t rub too hard on stains which cannot be removed. You risk damaging the surface. Contact a specialist first.
• Don’t use aggressive solvents (acetone, nail polish remover, turpentine etc.) or abrasive liquids |to remove stains and dirt. You will cause damages.
• Don’t use wrong care products like shoe polishes and cosmetic creams.
• Leather changes because of sunlight and heat. Leather can fad and get dry. Try to avoid direct daily sunlight and the proximity of heating. Always use care products with UV protection.
• Leather gets traces of use after a while. Leather can fade over the years. If changes occur (e. g. scratches, stains, fading), react early enough. The earlier leather is helped, the easier it is to keep the leather nice over a long period.
• Leather has an optimum humidity of 40 to 60% and needs ventilation. Leather can become mold when humidity is above 70% and/or without enough air circulation.
• Allow leather clothing to hang free with sufficient distance and ventilation. Too strong crumpled leather gets wrinkles, which cannot easily be removed.

Basic rules when dealing with leather shoes

• First check if the leather is absorbent. On absorbent leathers (aniline leather, suede, nubuck) a rubbed-in drop of water will sink into the surface and darken the leather. On non-absorbing leathers water runs off. Absorbent leathers are much more sensitive.
• First test all products and treatments in a hidden area. Especially when working on absorbent leather. Absorbent leather can easily be damaged if treated wrong.
• Porous leather should regularly be protected with waterproofing. But be careful! Despite such waterproofing, porous leather always remains sensitive and should not be worn in bad weather conditions.
• Regular cleaning and caring of furniture leather prevents staining and signs of wear and extends the life span.
• Always clean dirty leather before using leather care products.
• Always work with the recommended products from seam to seam.
• Don’t rub too hard on stains which cannot be removed. You risk damaging the surface. Contact a specialist first.
• Don’t use aggressive solvents (acetone, nail polish remover, turpentine etc.) or abrasive liquids |to remove stains and dirt. You will cause damages.
• Don’t use wrong care products like cosmetic creams.
• Leather gets traces of use after a while. Leather can fade over the years. If changes occur (e. g. scratches, stains, fading), react early enough. The earlier leather is helped, the easier it is to keep the leather nice over a long period.
• Stir out wetted shoes with newspaper paper and allow to dry at room temperature. Do not use a hairdryer and do not dry in direct sunlight. Otherwise the leather gets hard and stiff. Soften the leather by moving the leather fibres at the end of the drying process or when dry.
• Leather has an optimum humidity of 40 to 60% and needs ventilation. Leather can become mold when humidity is above 70% and/or without enough air circulation.
• Porous leather inside the shoes can dye the socks. Always make a rub test with a light and slightly moistened cloth. If the discolouration is too strong, darker socks must be worn in order to avoid unwished colouration.

Basic rules when dealing with leather bags

• First check if the leather is absorbent. On absorbent leathers (aniline leather, suede, nubuck) a rubbed-in drop of water will sink into the surface and darken the leather. On non-absorbing leathers water runs off. Absorbent leathers are much more sensitive.
• First test all products and treatments in a hidden area. Especially when working on absorbent leather. Absorbent leather can easily be damaged if treated wrong.
• Porous leather should regularly be protected with waterproofing. But be careful! Despite such waterproofing, porous leather always remains sensitive and should not be worn in bad weather conditions.
• Regular cleaning and caring of furniture leather prevents staining and signs of wear and extends the life span.
• Always clean dirty leather before using leather care products.
• Always work with the recommended products from seam to seam.
• Don’t rub too hard on stains which cannot be removed. You risk damaging the surface. Contact a specialist first.
• Don’t use aggressive solvents (acetone, nail polish remover, turpentine etc.) or abrasive liquids |to remove stains and dirt. You will cause damages.
• Don’t use wrong care products like cosmetic creams.
• Leather gets traces of use after a while. Leather can fade over the years. If changes occur (e. g. scratches, stains, fading), react early enough. The earlier leather is helped, the easier it is to keep the leather nice over a long period.
• Let the leather always dry by itself. Do not use a hairdryer and do not dry in direct sunlight. Otherwise the leather can shrink. Soften the leather by wringing at the end of the drying process or when dry.
• Leather has an optimum humidity of 40 to 60% and needs ventilation. Leather can become mold when humidity is above 70% and/or without enough air circulation.
• Leather bags can discolour. Therefore, bags should be stored in cloth bags.

Additional information

• Leather care
• Leather care instructions - Home remedies
• Shoe care
• Leather cleaner
• Ecological leather care
• Washing and dry cleaning leather

WE UNDERSTAND LEATHER - WWW.COLOURLOCK.COM